States / Arizona / Phoenix

Phoenix, AZ grease trap & interceptor requirements

Program run by City of Phoenix Water Services Department. Hand-checked against source Last checked 2026-10-17. Report an error / rule changed

Quick answer

From the official source(s) below, last checked 2026-10-17. Rules change; verify with your city.

Rules change; verify with your city. Summaries are plain-English restatements of the official source linked below; “Source says” shows the exact wording. Blank rows mean the sources we checked did not state that rule, not that there is no rule.

Required trap / interceptor type
Source says:
“If the FOG and solids occupy greater than 25% of the interceptor’s capacity, the FSE is required to perform a full cleaning of the interceptor.”
Sizing rule
The FOG BMP manual states: “The minimum size allowed in the City of Phoenix is 500 gallons.”
âś“ checked against source
Pumping / cleaning frequency
A full cleaning is required when FOG and solids occupy more than 25% of the interceptor's capacity; no hydromechanical interceptor may go more than 90 days without maintenance.
âś“ checked against source
Permit required?Not stated in the sources we checked
Permit & program feesNot stated in the sources we checked
Inspections
Grease traps/interceptors are subject to inspection.
Source says
“THE KITCHEN AREA The inspector will document how many grease bearing fixtures are in the facility.”
Record keepingNot stated in the sources we checked
Pumper / hauler approval
Cleaning must be performed by a licensed pumper.
âś“ checked against source
Reporting portalNot stated in the sources we checked
Fines & penaltiesNot stated in the sources we checked
Program contact602-534-6502

Sources

Find a grease trap pumper in Phoenix

Compare pumpers that service Phoenix and check they meet the city's hauler rules above. Directory coming soon.

Get notified

Pump grease traps in Phoenix?

Put your company in front of restaurants checking these rules. Featured listing (paid) – coming soon.

List your company

Size your interceptor

Use the grease interceptor sizing calculator (UPC, IPC and PDI methods), then confirm Phoenix's own minimums above. Not sure how often to pump? Read how often to pump a grease trap.

Other Arizona programs

ChandlerFlagstaffGilbertScottsdaleTucson

Grease rule changes, once a week

A short email when a city changes its FOG ordinance, pumping schedule, permit fees or reporting portal. Free.